Vampiress in Coffin |
Materials:
- wooden coffin from craft store (I found mine at Michaels)
- paint (I use acrylic paints)
- felt material for lining the coffin (optional)
- plastic skeletons
- small piece of yarn (if adding hair to the skeleton)
- fabric scraps (if adding clothes to the skeleton)
- varnish (I use Delta Ceramcoat Matte Varnish)
- fine sand paper
- hot glue and white glue
Step 1: Preparing the Coffin
Unscrew the hinges and latches from the coffin so that sanding, painting, and creating is easier. We will put them back together at the very end. Sand down the coffin with fine sand paper to get rid of any flaking wood and to make painting easier. Once this is done, you can quickly dust off the coffin and get ready for painting (sorry my cutting mat is a little dirty, but it is well loved!!).
Step 2: Painting and Detailing the Coffin
Paint the coffin with the color of your choice. I chose Apple Barrel Black Craft Paint. You will want to put at least two coats of paint on. If you plan on adding felt material to the insides, you do not have to paint the inside of the coffin. I like to paint the top edges of the interior to ensure that no wood shows after I add the fabric.
Once the paint has dried, you can add a little detail. I added lines around the edges of the coffin with Apple Barrel Country Grey. After this is done, you can then apply two coats of varnish and let dry.
Another cute detail is to add embellishments to the outside of the coffin. Here I have added a cross to the lid.
Step 3: Lining the Coffin with Fabric
Now that the coffin is completely dry, you can measure the insides of the coffin. I have found that the easiest way to do this is to use a vinyl measuring tape, the kind used for sewing. Once this is done, you can cut out the pieces of felt material. I am using grey felt for this design.
When the pieces are all cut out, you can glue them down with a hot glue gun. Now you can reattach the hinges and the latch.
Step 4: Creating the Skeleton
Whenever I design a coffin, I usually have a character and a story that goes with it. If you couldn't find a skeleton (mine came from the dollar store in a pack of four skeletons) or if you just wanted to decorate the coffin, a great idea is to fill the coffin with Halloween candy or any other number of items (my mom uses hers to carry around some gems she uses as Bingo markers!).
While this is drying you can begin to make clothes for the skeleton if you wish. This is a great use for the fabric scraps that you can not bear to throw away! When I make pants, or dresses, or shirts for the skeleton, I cut out a general shape for that item and sew it together.
Do not worry if it looks uneven or if the stitching is not perfect; once it is on the skeleton it will look as though it has been buried for a while and will really make the whole craft pop. Try and make the clothes a little loose fitting (I always eyeball this process, but it might be a good idea to place the skeleton on the fabric before cutting and sewing) so that you will have an easy time putting the clothes on.
To really give her the appearance of a vampiress, I cut the pointy end of a wooden skewer and stuck it where her heart would be. Now we know how this vampiress came to be a skeleton!
Now the skeleton is complete! You can place him or her in the coffin and display for everyone to enjoy! For more fun and spooky skeletons, you can visit my Etsy store: Ersatz Emporium
HAPPY HALLOWEEN!!
No comments:
Post a Comment